Code: SFM20M
Brand: Fimar
20 liter gas fryers. Structure, lids, baskets and heating elements in AISI 304 stainless steel - worktop and tanks pressed in 15/10 thick stainless steel - handles, baskets, knobs and lids in insulating material - gas connection 1/2""G - 7-position thermostat from 110÷190°C - tubular stainless steel burners with turbulator system which slows down the flow of the flame, increasing its yield by approx 50%, optimized combustion with thermocouple valve and safety thermostat - protected pilot light - piezoelectric ignition - natural gas supply, LPG kit supplied - drain tap - equipped with a large basket - bench models. They reach 190C° in about 10 minutes.
Construction details | |
---|---|
Structure, lids, baskets and resistances in AISI 304 stainless steel | Worktop and pressed tanks in 15/10 thick stainless steel |
Handles, baskets, knobs and lids in insulating material | Tubular stainless steel burners with turbulator system. |
Datasheet | |
---|---|
Power supply 400/3N/50-60Hz | Power 16.5 kW |
Temperature 110-190°C | Dimensions 40x70x98(h) cm |
Weight 47 Kg |
Manual thermosealer TS1A - automatic sealing
€ 3.194,40
Manual thermosealer TS2 - manual sealing
€ 3.666,30
Manual thermosealer TS2A - automatic sealing
€ 4.554,00
€ 4.455,00
Semi-automatic thermosealer TS300
€ 1.023,00
Semi-automatic thermosealer TS400
€ 1.425,60
Mold 370 x 280 mm - n.1 imprint
€ 587,40
Mold 180 x 135 mm - 4 imprints
€ 706,20
Mold 260 x 195 mm - n.1 imprint
€ 587,40
Multiform mould: 137x190mm 137x125mm 137x95mm
€ 686,40
€ 37,62
€ 40,92
€ 79,20
Mold 180 x 280 mm - n.2 imprints
€ 653,40
Mold 115 x 280 mm - 3 imprints
€ 679,80
Multiform mould: 190 x 260mm 190x230mm 190x137mm 95x137mm
€ 1.128,60
Mold 138 x 96 mm - n.2 imprints
€ 72,60
Mold 193 x 138 mm - n.1 imprint
€ 72,60
Mold 180 x 180 mm - n.1 imprint
€ 72,60
Mold 195 x 260 mm - n.1 imprint
€ 72,60